The singlespeed with coaster brake and kickstand seemed quite practical for Boston:
21 December 2010
Linus City Bike Spotted
Saw this bike in the South End last week, and the black and white and leather color scheme caught my eye. Linus Bikes are based in Venice, California, but they now have dealers nationwide.
The singlespeed with coaster brake and kickstand seemed quite practical for Boston:
The singlespeed with coaster brake and kickstand seemed quite practical for Boston:
20 December 2010
Photos from the Somerville Illuminations Bicycle Tour
Freezing cold but so much fun! Please enjoy some photos here from the Somerville Illuminations Bicycle Tour. Click through for a larger version.
Happy Holidays everyone!
Happy Holidays everyone!
15 December 2010
Brainstorm light mounting with me?
Hey everyone,
I've been pushing a dynamo hub since last summer, with all the best intentions of getting a headlight mounted. Now it's nearly the darkest time of the year and still no dynamo headlight. I'm having a hard time deciding how to get something on there. All these photos should click through to enormous ones if that's at all helpful...
I have a vintage Blackburn front rack, which I love for the consistent aesthetics to my frame and it's match to my rear rack. Also my 1977 frame just doesn't have mounting points for a Nitto rack (or a headlight!).
The rack has stays at two different positions, narrower in front and wider at the middle. I'm not committed to using a particular stay for the mounting point, but I would love to nestle the light as best as possible inside the protection of the rack's platform, just for help preserving the light while parked next to bikes who might be careless, etc. This is a city bike and I'll still be parking it and leaving it for a bit.
I have the headlight my husband took off his Brompton, upside of using it is that it's currently just taking up space, downside is that it's unclear how to mount it on my bike. I'd prefer to mount my eventual headlight to the front rack and not the fork, to keep my fork as blemish-free as possible. I'm open to the idea of buying a different headlight, but I'm wondering if you folks have any ideas for getting this (or any other one) mounted on my somewhat narrow-gauge Blackburn front rack?
This light's mounting bracket can easily be removed, leaving us with a plastic housing with a bolt going through it. I can certainly get a longer bolt and any number of washers.
What I can't do is invert the light, as there are wires on the underside that must rely on the top of the light for some added rain protection.
Here is where I imagine mounting the light, allowing it to be easily seen by other road users, and allowing my rack to continue to be functional. The mounting needs to be secure enough that it stays pointed forward and doesn't slide down the rack's stay.
Edited to Add:
Here are my clamps from Harris, as well as some spacers which had come from the mounting bracket on my second tail light set. If I go the p-clamp route it would be ideal to find one smaller than this one, I'd be wrapping a whole lot of padding to get it to a good clamp on the thin tubing. I went to the hardware store hoping to find something like that and they guy there suggested hose clamps, which I understand can be smaller and certainly very adjustable. He also suggested this pre-drilled metal tape stuff, the idea being that one band of it would go around the stay, and a vertical band would go up and over the rack platform for vertical stability. That sounded like it would rattle, and I could probably do something similar with zip ties (and less rattle). I'm liking the VO bracket suggested below for stability reasons, but I think it would also have a challenge in getting it on to my rack (maybe someone could solder it on?)
I've been pushing a dynamo hub since last summer, with all the best intentions of getting a headlight mounted. Now it's nearly the darkest time of the year and still no dynamo headlight. I'm having a hard time deciding how to get something on there. All these photos should click through to enormous ones if that's at all helpful...
I have a vintage Blackburn front rack, which I love for the consistent aesthetics to my frame and it's match to my rear rack. Also my 1977 frame just doesn't have mounting points for a Nitto rack (or a headlight!).
The rack has stays at two different positions, narrower in front and wider at the middle. I'm not committed to using a particular stay for the mounting point, but I would love to nestle the light as best as possible inside the protection of the rack's platform, just for help preserving the light while parked next to bikes who might be careless, etc. This is a city bike and I'll still be parking it and leaving it for a bit.
I have the headlight my husband took off his Brompton, upside of using it is that it's currently just taking up space, downside is that it's unclear how to mount it on my bike. I'd prefer to mount my eventual headlight to the front rack and not the fork, to keep my fork as blemish-free as possible. I'm open to the idea of buying a different headlight, but I'm wondering if you folks have any ideas for getting this (or any other one) mounted on my somewhat narrow-gauge Blackburn front rack?
This light's mounting bracket can easily be removed, leaving us with a plastic housing with a bolt going through it. I can certainly get a longer bolt and any number of washers.
What I can't do is invert the light, as there are wires on the underside that must rely on the top of the light for some added rain protection.
Here is where I imagine mounting the light, allowing it to be easily seen by other road users, and allowing my rack to continue to be functional. The mounting needs to be secure enough that it stays pointed forward and doesn't slide down the rack's stay.
Edited to Add:
Here are my clamps from Harris, as well as some spacers which had come from the mounting bracket on my second tail light set. If I go the p-clamp route it would be ideal to find one smaller than this one, I'd be wrapping a whole lot of padding to get it to a good clamp on the thin tubing. I went to the hardware store hoping to find something like that and they guy there suggested hose clamps, which I understand can be smaller and certainly very adjustable. He also suggested this pre-drilled metal tape stuff, the idea being that one band of it would go around the stay, and a vertical band would go up and over the rack platform for vertical stability. That sounded like it would rattle, and I could probably do something similar with zip ties (and less rattle). I'm liking the VO bracket suggested below for stability reasons, but I think it would also have a challenge in getting it on to my rack (maybe someone could solder it on?)
13 December 2010
Vu à Amsterdam
My French friend J was just at a conference in Amsterdam and sent this photo for our enjoyment. This is certainly a decked-out and cheerful bike!
10 December 2010
09 December 2010
Somerville Illuminations Bicycle Tour
Join the Somerville Bicycle Committee on Saturday evening, Dec 18, to celebrate the coming of winter and year round cycling. We will enjoy a casual bike tour to see some of the city’s homes warmly lit for the holidays.
We will meet at the Somerville High School entrance at 6:50pm, departing promptly at 7:15 pm.
We will tour the city in coordination with the Somerville Arts Council’s Illuminations Holiday Tour. The start of our ride is scheduled halfway between two trolley departures, so we will not interfere with the trolley tour.
This is a winter evening ride, so please dress warmly and use bike lights. Holiday lights, costumes & festive cheer encouraged. Heavy rain, wind, snow or ice cancels bike tour.
We will meet at the Somerville High School entrance at 6:50pm, departing promptly at 7:15 pm.
We will tour the city in coordination with the Somerville Arts Council’s Illuminations Holiday Tour. The start of our ride is scheduled halfway between two trolley departures, so we will not interfere with the trolley tour.
This is a winter evening ride, so please dress warmly and use bike lights. Holiday lights, costumes & festive cheer encouraged. Heavy rain, wind, snow or ice cancels bike tour.
03 December 2010
Handsome Bob Jackson
Spotted on Cambridge Street the other night, this Bob Jackson is a beautiful city bike.
A handsome bike, but not one that our non-cyclist friend picked out from the many left casually locked along the street.
The bell is nicely mounted on the stem, the handlebars partially wrapped with ends made from some wine bottle's cork.
That is a well-loved Brooks saddle!
And what pretty lugs and paintwork!
A handsome bike, but not one that our non-cyclist friend picked out from the many left casually locked along the street.
The bell is nicely mounted on the stem, the handlebars partially wrapped with ends made from some wine bottle's cork.
That is a well-loved Brooks saddle!
And what pretty lugs and paintwork!
01 December 2010
Rainy Day Giveaway - one pair chrome fenders
They don't look like much above, but what you have here are a pair of new-in-packaging chrome fenders sized for Schwinn 26" wheels, in their packaging, covered with dust. Note that this size is different from 26" mountain bike wheels and also 26" Raleigh/English wheels... Sheldon has a 26" wheel size cheat sheet here.
It is entirely possible that these fenders will fit another 26" wheeled bike, but I'm thinking that since Schwinns don't get much love, these free fenders should go to a Boston/Cambridge area Schwinn.
Out of the packaging they should look like these above.
So here's the idea:
Comment below with a description of your Schwinn. Give me an email address (in comment or by email: chiccyclist at yahoo.com) where we can chat off the blog. We will arrange to meet someplace in the Boston/Cambridge area, I'll take a photo of your poor fenderless-Schwinn for the blog, and you pedal off with some free chrome fenders for a winter of splash-free cycling. Ideally you'd send an updated photo with the fenders mounted, but I won't hold you to it.
The fenders will have to go to the Schwinn whose schedule is closest to that of my Dawes, but I imagine I've already set so many limits here that there will be only a few folks even interested in these fenders... and, like dating, it only takes one match*.
* If you're a cute single heterosexual man with a 26" Schwinn, please note that in the comments too and I'll send a cute single female friend of mine in my place. I won't even tell her why. She's got an awesome pink singlespeed, so you'll at least have bikes in common.
Subscribe to:
Posts (Atom)
